LORNET 24

The world's most compact professional inspection tool. Capable of detecting miniature electronic devices

Non-linear detector

LORNET 24

  • 2400MHz transmitter signal range - a generally accepted standard for indoor operations
  • Operating weight only 700 grams
  • Miniature device detection

The device is able to detect any electronic devices that can be both ON and OFF from the power source. The design of the device resembles a hand-held metal detector, so it is ideal for screening individuals

Detection of any electronic devices

Detection of any electronic devices

The device is able to detect the smallest and best shielded electronic devices

Convenience of search

Convenience of search

The record low weight of the device - only 700 grams in working condition and compact design allow you to conduct inspection and search operations in difficult conditions of limited space

Transport packaging

Standart: The LORNET 24 product kit is delivered in a special cloth bag that protects the device from damage

Export: In the export version, the LORNET 24 product is delivered in a stowage case

Original transport packaging
Advanced transport packaging

Technical parameters

Transmitter

Bandwidth

2406 - 2414 MHz

Two types of radiated signal:

"Pulse" - Pulse modulation of the carrier frequency with a duty cycle:

44

"CW" - Continuous carrier frequency radiation:

Maximum peak power of radiation in pulse mode (Pulse)

10 W

Maximum average radiation power in pulse mode (Pulse)

230 mW

Maximum continuous radiation power (CW)

200 mW

The range of manual power adjustment

20 dB

Width of the direction diagram

90 degree

Reciever

Frequency rate:

Second harmonic

4812 - 4828 MHz

Third harmonic

7218 - 7242 MHz

Receiver sensitivity is not worse

-110 dBm

Dynamic range of the receiving tract (including the attenuator)

24 (10) dB

The amount of frequency channels when automatically selecting the receiving channel

5

Battery

Li-ion battery:

Voltage

3.6 V

Capacity

7.8 Ah

Continuous operation time at maximum power not less than:

In Pulse mode

3 h

In CW mode

1.5 h

Size and weight

The device size:

In working condition

39х10х6 cm

In folding condition

22х10х7.5 cm

Weight in working condition

700 g

The size of the bag

26х14х16 cm

Weight in transport package

1.7 kg

Export package dimensions

32х28х12 cm

Weight in export package

2.8 kg

Operating terms

Operating temperature range

from +5 to +40°С

Abilities

  • The appearance of the device resembles a hand-held metal detector and is therefore convenient for inspection of individuals after passing through a frame metal detector
  • The small thickness (22 mm) of the antenna module and the compact design and record low weight of the device allow search operations in limited space and inaccessible places
  • Two operating modes: 1) pulse (Pulse), 2) continuous (CW)
  • Recognition (identification) of electronic components from natural semiconductors (rust, metal-metal contacts, etc.) in CW mode, by listening through the built-in speaker or wireless headphones to the signal from the output of the amplitude detector when receiving the 2nd and 3rd harmonics
  • CW mode can be used to identify working analogue radio microphones due to the occurrence of acoustics feedback
  • Additional assessment of the 2nd and 3rd harmonic levels by listening to the frequency of clicks played through the built-in speaker or wireless headphones
  • Automatic search for the frequency channel with the lowest level of interference for operation in a tough electromagnetic situation
  • Automatic and manual power output adjustment
  • Manual adjustment of receiver sensitivity

Equipment kit

  • Receiving and transmitting unit with remote control handle and built-in battery container
  • 2 (two) replaceable (Li-ion) rechargeable batteries (4 V)
  • Charging unit for rechargeable battaries
  • 220V battery charger for rechargeable batteries
  • Wireless headset with radio receiver
  • AC adapter (220V) for radio receiver
  • Transport bag-stowage
  • Documentation (operator's manual, passport)

Application

  • Counterintelligence(TSCM)
  • Inspection of people after the frame metal detector for the passage of prohibited electronics (bodyless digital voice recorders, SIM cards, etc.)
  • Search the premises for electronic devices, including small-sized ones (bugs, voice recorders, etc.) in the on or off state
  • Search vehicles for unauthorized electronics, including RFID tags, GPS trackers, etc.
  • Antiterror
  • Inspection of items (parcels, suspicious bags, etc.) for the presence of electronic components of explosive devices and metal-damaging fragments